NORFOLK & WESTERN A 2-6-6-4
LOCOMOTIVE DRAWINGS
Reproductions of
Original Norfolk & Western Engineering Drawings
Available
from http://www.livesteamlocomotives.com
NORFOLK & WESTERN Class: A 2-6-6-4
Rd. No’s.
1200 - 1243
See our N&W
Railroad drawings page for ordering instructions.
Separate prices for all Norfolk
& Western 2-6-6-4 locomotive (steam engine) drawings total $185.00
Buy the full
set for $157.25 and save 15%
See separate page listing for N&W Class A and Y6b Tender Drawings and
N&W Auxiliary
Water Tender Drawings
All drawings are the property of
Roger Goldmann and may not be copied, reproduced,
sold, or redistributed for profit of any kind.
Prices are subject to change without
notice.
|
Qty. |
Price |
Norfolk & Western Number |
Scale to 1 ft. |
Dwg. size (in.) |
Drawing
Title |
Also used
on: |
|
|
$157.25 |
|
|
|
Full set (all drawings listed below) – save $27.75 |
|
|
|
28.00 |
G38750 |
1 ½” |
36x59 |
Arrange.
Side Elevation, Front |
|
|
J38751 |
1 ½” |
36x84 |
Arrange.
Side Elevation, Back |
|
||
|
|
17.00 |
E38752 |
1 ½” |
30x37 |
Cross
Sections, Front Elev. & Sections To Boiler Bearing of Front Engine |
|
|
E38753 |
1 ½” |
30x37 |
Cross
Sections, Ahead of Back Cylinders & Back Engine to Middle Drivers |
|
||
|
E38754 |
1 ½” |
30x37 |
Cross Sections,
Rear Drivers of Back Engine to Firebox & Ashpan |
|
||
|
|
2.00 |
#C19469 |
¾” |
22x16 |
Diagram
of Baker Valve Gear |
|
|
|
5.00 |
#E27085 |
1 ½” |
30x30 |
Cab |
Y4,5,6,6a,6b |
|
|
8.00 |
K35024 |
1 ½” |
18x84 |
Arrange.
Of Baker Valve Gear |
|
|
|
6.00 |
E38747 |
1 ½” |
30x37 |
Frame for
Trailing Truck |
|
|
|
4.00 |
D38775 |
1 ½” |
22x32 |
Development
of Outside Side Sheet, Boiler (Firebox) |
|
|
|
15.00 |
J38793 |
2” |
36x84 |
Cylinder
Portion for Engine Bed, Back Engine |
|
|
|
15.00 |
J38795 |
2” |
36x84 |
Cylinder
Portion for Engine Bed, Front Unit |
|
|
|
15.00 |
J38797 |
1 ½” |
36x84 |
Engine
Bed, Front Unit |
|
|
|
17.00 |
I38798 |
1 ½” |
36x93 |
Engine
Bed, Rear Unit |
|
|
|
4.00 |
D41755 |
3” |
34x22 |
Connecting
(Main) Rod (plain bearing) |
|
|
|
6.00 |
E41761 |
3” |
30x37 |
Arrange.
Of Engine Truck |
|
|
|
6.00 |
E42834 |
3” |
30x37 |
Parallel
(Side) Rod – Front (Timken Roller Bearing) |
|
|
|
4.00 |
D42835 |
3” |
22x31 |
Parallel
(Side) Rod, Intermediate, (Timken Roller Bearing) |
|
|
|
6.00 |
E42836 |
3” |
30x37 |
Connecting
(Main) Rod, (Timken Roller Bearing) |
|
|
|
2.00 |
C42856 |
6” |
22x16 |
Eccentric
Crank |
|
|
|
6.00 |
E43317 |
3” |
30x37 |
Intermediate
Driving Wheel |
|
|
|
6.00 |
E43361 |
3” |
30x37 |
Main
Driving Wheel (w/Plain Bearing Crank Pin) |
|
|
|
6.00 |
E43359 |
3” |
30x37 |
Front
Driving Wheel |
|
|
|
5.00 |
F45773 |
3” |
18x54 |
Parallel
(Side) Rods |
|
|
|
2.00 |
#C46264 |
3” |
18x21 |
Eccentric
Rod, Baker Valve Gear |
Y6b |
# Used
on more than one locomotive of the same railroad
Online: http://www.livesteamlocomotives.com
By mail: Roger Goldmann,
413 Morrison Lane, Dept. D-742, Santa Paula, CA 93060-1807
e-mail: drawings@livesteamlocomotives.com